PHI Tube End-Finishing Machines, Models 2C, 2CP, 2CPV, 3CPV and 8CPV, form a family of machines for preparing the ends of tube or pipe for joining with other tube or pipe sections, valves, T-joints, or machinery. Capabilities of PHI Tube and Pipe End-Finishing Machines Using PHI’s tube end-finishing machines, tube and pipe ends can be […]
PHI’s Model 420 Precision Manual Bending Machine is a totally flexible and precise manually operated “draw” or “rotary die” type machine. It has a special gear-operated bend arm that will increase leverage 4 to 1 when bending heavier tubes. The bender head is bolted to a machine table which is mounted on a tooling storage […]
PHI’s Model DF is a high-production tube and pipe end finishing unit, allowing the production of up to 600 double lap flares per hour. The machine is operated by a single lever which activates the two steps required to form a double flare. No electricity is required. All operations are pneumatically powered. The Model DF […]
PHI’s Models M343 and M369 Flanging Machines cold-form 1/2” TO 8” IPS pipe ends to a 90° flange. The machines are simple in design and simple to operate. Skilled labor is not needed to operate the machine, nor to bolt the flanges together — entirely eliminating the need for skilled labor in joining pipe sections. […]
PHI’s synchronized tube bending machines, Models 210, 220, and 233, offer three-axis bending with one powered axis for the degree of bend (DOB). When configured as shown, these 200 series benders provides high-speed production of simple and complex bent tube shapes up to 3 in outside diameter (OD) and pipes up to 2 in IPS. Configurations […]
