search results.

70 results found.

70 results found.

Presses – Hydraulic Compression

PHI Hydraulic Compression Press M002

For high quality, high production plastic and rubber molding bonding and laminating. “Building-Block” Design and Construction To most efficiently and economically meet the increasingly varied operating and production needs of the plastic, rubber, and electronics industries, PHI has developed a versatile, standardized “building-block” system for the design and construction of its compression presses. The basic […]

Read More

Presses – Precision

PHI Precision Presses

Standard air actuated presses that incorporate PHI’s specialized platen designs and advanced pneumatic/air over oil systems into a precision four post press. Intended for applications requiring accurate control of pressure, temperature and parallelism. Force Standard models with capacity rated from 2,000 lbs. to 60,000 lbs. Die Space Standard models with die space, or platen size […]

Read More

Presses – Multilayer

PHI Multilayer Press

For years, PHI has been the world’s leading manufacturer of Multilayer Laminating Presses, The exacting mechanical accuracy exceptionally precise controls and advanced operating features of PHI presses have made them first choice of printed circuit board manufacturers the world over. In these new and advanced models, PHI engineers have incorporated scores of important new features […]

Read More

Presses – H Frame

PHI H Frame Press

PHI hydraulic presses H frame presses are versatile shop presses ideal for: Assembly Straightening Bendfing Product Testing Forming and various other applications Press Frames are constructed of heavy duty steel plates. Cylinders are double-acting operating at 3000 psi for lower hydraulic system pressure and greater reliability. Ram attachments for hydraulic lifting of the table to […]

Read More

Manual Bending Machines – Bench Mount – 410 | 411

PHI Manual Bending Machine Family Feat

PHI’s two bench-mounted manual bending machines allow for economical bends of tube up to 1.0 in OD x 0.065 in WT and pipe 1/2″ IPS. The 410 and 411 benders are the ideal bending machines for prototype departments, small machine shops and operations where cost is a factor and when only a few bends are needed […]

Read More

End Finishing Machines – 2C | 2CP | 2CPV | 3CPV | 8CPV

PHI Tube and Pipe End Finishing Machines Models 2C, 2CP, 2CPV, 3CPV, 8CPV

PHI Tube End-Finishing Machines, Models 2C, 2CP, 2CPV, 3CPV and 8CPV, form a family of machines for preparing the ends of tube or pipe for joining with other tube or pipe sections, valves, T-joints, or machinery. Capabilities of PHI Tube and Pipe End-Finishing Machines Using PHI’s tube end-finishing machines, tube and pipe ends can be […]

Read More

Manual Bending Machines – Precision – 420

PHI 420 Precision Manual Bending Machine

PHI’s Model 420 Precision Manual Bending Machine is a totally flexible and precise manually operated “draw” or “rotary die” type machine. It has a special gear-operated bend arm that will increase leverage 4 to 1 when bending heavier tubes. The bender head is bolted to a machine table which is mounted on a tooling storage […]

Read More

End Finishing Machine – DF (Double-Flare)

PHI DF (Double-Flare) Tube and Pipe End Finishing Machine

PHI’s Model DF is a high-production tube and pipe end finishing unit, allowing the production of up to 600 double lap flares per hour. The machine is operated by a single lever which activates the two steps required to form a double flare. No electricity is required. All operations are pneumatically powered. The Model DF […]

Read More

End Finishing Machines – Flanging – M343 | M369

PHI Tube and Pipe End Finishing Machines - Flaring - Models M343, M369

PHI’s Models M343 and M369 Flanging Machines cold-form 1/2” TO 8” IPS pipe ends to a 90° flange. The machines are simple in design and simple to operate. Skilled labor is not needed to operate the machine, nor to bolt the flanges together — entirely eliminating the need for skilled labor in joining pipe sections. […]

Read More

Synchro Bending Machines – 210 | 220 | 233

PHI 233 Synchro Tube and Pipe Bending Machine

PHI’s synchronized bending machines, Models 210, 220, and 233, offer three-axis bending with one powered axis for the degree of bend (DOB). When configured as shown, these 200 series benders provides high-speed production of simple and complex bent tube shapes up to 3 in outside diameter (OD) and pipes up to 2 in IPS. Configurations range […]

Read More
Back to top